Instrumentation
Instrumentation
- Views:
-
Anderson AE Air Eliminator
from $7,118.48
Save 13%
The “AE” air eliminator solves many of the problems associated with air or gas presence in pumped liquids. Line vibration due to 2-phase fl ow, poor fl ow meter measurement accuracy, and product quality issues are a few of the more common negative effects of gas presence in a liquid. As the name suggests, the “AE” series Air Eliminator is designed to remove the air or gas present in these product streams. Designed to be located after the pumping device in a positive pressure line, product enters at a tangent to the wall ofthe vessel, the resultant force stratifi es the incoming product putting the heavier liquidtowards the wall with the lighter aerated product separating towards the center. Thisseparation is then completed by allowing only the liquid at the outer wall to exit the vessel at the bottom located outlet. When a sufficient quantity of air is collected at the center it is automatically vented at the top of the vessel. The fully mechanical design means that no additional control boxes or electrical wiring is needed to operate, simplifying installation and reducing long term ownership cost. Applications for the “AE” can vary from intake receiving systems where the “AE” is used to remove air for proper measurement, to the supply of a filling process for improvement of portion control.
-
Anderson BC-104 Batch Controller
from $864.85
Save 13%
The introduction of the BC-104 brings to Anderson’s offering of superior products an extremely versatile and complete control package. To start, the BC-104 offers all of the capabilities of any stand alone batch controller in a single panel mount device. Then add to this package analog input capability, control inputs, and additional relay and analog outputs that are integrated using an internal programmable logic controller, and you have a device which can satisfy a multitude of custom processing needs. The possibilities range from tank selection or multiple preset capabilities to control of an additive dosing pump or a batch system with automatic supply selection and empty tank level alarms.
-
Anderson EB Pressure Gauge (Pharmaceutical)
$343.00
Save 13%
The 90mm Anderson "Pharmaceutical" gauge has rapidly become the pressure gauge of choice for applications in the pharmaceutical and biotechnology industries. It is designed to meet the most stringent of specifi cations, including those for accuracy, surface fi nish, and temperature stability. Applications include process lines and vessels, fi ltration equipment, pumps, heat exchangers and other pressure dependent devices or processes. These gauges are particularly appropriate when the process line or equipment will be steam sterilized. The unfi lled version can even be completely autoclaved while on the equipment.
-
Anderson EC/EE 120mm Sanitary and Homogenizer Pressure Gauges
$322.00
Save 13%
Anderson sanitary pressure gauges are precision instruments designed for use in pressure-dependent processes in which variation of just a few psi can spell the difference between a mediocre product and one of high quality. Anderson gauges meet every current sanitary standard and are being used by the thousands in food, dairy, beverage and pharmaceutical manufacturing applications worldwide.
-
Anderson EC/EE 120mm Sanitary and Homogenizer Pressure Gauges
$322.00
Save 13%
Anderson sanitary pressure gauges are precision instruments designed for use in pressure-dependent processes in which variation of just a few psi can spell the difference between a mediocre product and one of high quality. Anderson gauges meet every current sanitary standard and are being used by the thousands in food, dairy, beverage and pharmaceutical manufacturing applications worldwide.
-
-
Anderson HM Turbine Flow Meter 1" 17-4 Rotor Rebuild Kit HM600-100FF
$617.12
Save 1%
Anderson HM Turbine Flow Meter 1" 17-4 Rotor Rebuild Kit HM600-100FF
-
Anderson HM Turbine Flow Meter 1" Stainless Rotor Rebuild Kit HM600-100SS
$617.00
Save 1%
Anderson HM Turbine Flow Meter 1" Stainless Rotor Rebuild Kit HM600-100SS
-
Anderson HM Turbine Flow Meter 1.5" 17-4 Rotor Rebuild Kit HM600-150FF
$657.66
Save 1%
Anderson HM Turbine Flow Meter 1.5" 17-4 Rotor Rebuild Kit HM600-150FF
-
-
Anderson HM Turbine Flow Meter 1.5" Stainless Rotor Rebuild Kit HM600-150SS
$657.66
Save 1%
Anderson HM Turbine Flow Meter 1.5" Stainless Rotor Rebuild Kit HM600-150SS
-
Anderson HM Turbine Flow Meter 2" 17-4 Rotor Rebuild Kit HM600-200FF
$763.07
Save 1%
Anderson HM Turbine Flow Meter 2" 17-4 Rotor Rebuild Kit HM600-200FF
-
Anderson HM Turbine Flow Meter 2" Stainless Rotor Rebuild Kit HM600-200SS
$763.06
Save 1%
Anderson HM Turbine Flow Meter 2" Stainless Rotor Rebuild Kit HM600-200SS
-
-
Anderson HM Turbine Flow Meter 3/4" 17-4 Rotor Rebuild Kit HM600-075FF
$617.12
Save 1%
Anderson HM Turbine Flow Meter 3/4" 17-4 Rotor Rebuild Kit HM600-075FF
-
Anderson HM Turbine Flow Meter 3/4" Stainless Rotor Rebuild Kit HM600-075SS
$617.00
Save 1%
Anderson HM Turbine Flow Meter 3/4" Stainless Rotor Rebuild Kit HM600-075SS
-
Anderson HM Turbine Flowmeter
from $156.46
Save 13%
Anderson’s HM-series turbine flowmeter is the solution for applications requiring an economical, accurate flowmeter. Using the proven method of counting the rotation of a turbine within a flowing stream of liquid, the “HM” turbine flowmeter is not merely a modification of an industrial design, but a design that was created specifically for the sanitary food and dairy industry.
-
-
Anderson HMP Turbine Flow Meter 1" Stainless Rotor Rebuild Kit HMP600-100
$662.00
Save 1%
Anderson HMP Turbine Flow Meter 1" Stainless Rotor Rebuild Kit HMP600-100
-
Anderson HMP Turbine Flow Meter 1.5" Stainless Rotor Rebuild Kit HMP600-150
$672.00
Save 1%
Anderson HMP Turbine Flow Meter 1.5" Stainless Rotor Rebuild Kit HMP600-150
-
Anderson HMP Turbine Flow Meter 2" Stainless Rotor Rebuild Kit HMP600-200
$774.00
Save 1%
Anderson HMP Turbine Flow Meter 2" Stainless Rotor Rebuild Kit HMP600-200
-
-
Anderson HMP Turbine Flow Meter 3/4" Stainless Rotor Rebuild Kit HMP600-075
$662.00
Save 1%
Anderson HM Turbine Flow Meter 3/4" Stainless Rotor Rebuild Kit HM600-075SS
-
Anderson HMP Turbine Flowmeter
from $156.46
Save 13%
The “HMP” series turbine flowmeter is suited for applications that require an economical and accurate measurement solution. The “HMP” is designed using the proven method of monitoring the rotation of a turbine rotor in a flowing product stream. This is not a modification of an industrial design but a flowmeter designed specifically for sanitary applications. Understanding the requirements of these applications has produced a flowmeter with superior durability. The all 316L SS construction (including rotor), along with a unique 2-piece housing design eliminates the need for internal locking rings to retain internal components. This makes for a truly cleanable design that also provides exceptional performance. When used with the HTS1000 probe, the non-magnetic sensing of the rotor eliminates drag - present in other magnetically sensed turbines. This lack of drag provides better accuracy and extended operational life. These features, coupled with a durable Rulon® bearing and stainless steel shaft, give the “HMP” the ability to handle difficult process requirements such as steam blowdowns and the need to autoclave without difficulty.
-
Anderson HT Optical Transition Sensor
$2,347.05
Save 12%
Anderson's HT Optical Transition Sensor is a compact sensor used to identify product changeovers in sanitary lines by providing a linear 4-20mA output proportional to the concentration of solids or fat molecules in a flowing stream of product. This in turn allows for automation of applications involving milk, ice cream, whey, juice or beer.
-
-
Anderson IZMAG Electromagnetic Flowmeter
$0.00
The IZMAG is Anderson Instrument Company’s next generation of electromagnetic flow meter. Building on the qualities that have made it’s predecessor, the IZMS meter, the industry standard in accuracy and longevity, the IZMAG incorporates new design and performance features that allow the IZMAG to excel in the most demanding sanitary processing environment.
-
