Anderson/Negele ITM-4 Turbidity Meter

The ITM-4 is a 4 beam turbidity meter that allows the monitoring and controlling of low levels of suspended solids in liquid media. The compact design makes installation and set-up easy but is not short on features. There are switching and analog (4-20mA) outputs standard. Also, 4 remote selectable ranges are available to handle different products on the same process line.

$7,393.00

$6,486.62

You save $906.38 (12%)!

The ITM-4 is easy to spec, the only thing that you need to choose is the connection size. Setup is also easy with navigation of the on screen menus and selecting the units, analog output range, and switch point for your product.

Most importantly the design is robust and offers a lower cost of ownership than many other turbidity meters. The LED lamp technology provides a longer life than tungsten bulbs. The sapphire glass prevents scratches and fouling of the glass is compensated in the unit. Most importantly, the construction is the same rugged water tight stainless steel construction you have come to expect from Anderson. In fact the unit complies to the German IP69K standard which is more stringent than NEMA 4X.

For more information on this turbidity meter, or any of our Anderson Instrument Company products visit www.andinst.com or call our Customer Service Department at 1-800-833-0081

• 3-A Compliant; Third party verified
• 2 units (NTU and EBC) 11 ranges each
• Low range down to 0-5 NTU and 0-1 EBC
• High range up to 0-5000 NTU and 0-1250 EBC
• 4 Remote selectable ranges
• 4-20 mA plus Single switch output

Applications
• Filter monitoring
• Quality control and standardization
• Process control of brewing processes
• Waste water control
• Whey/tower water monitoring
• Yeast monitoring/dosing

Specifications:: Process Connection: 1.5″, 2”, 2.5”, 3”, 4″
Installation: 5 pipe diameters before and 2 after instrument
Materials:: Connection Head: SS 1.4305 (303 Stainless) 89 mm dia. Fitting: SS 1.4404 (316L)
Optical Block: PEEK
Glass Panes: sapphire glass
Temperature Ranges:: Ambient: -10-60 °C (14-140°F)
Process: 0-100 °C (32-212°F)
CIP/SIP-Cleaning: up to 130 °C (266°F) 30 psi max
Operating Pressure: 85 psi maximum
Protection Type: IP69K
Measurement Principle: acc. to EN 7027 4-beam-altern. light
Wave Length: acc. to EN 7027 860 nm ± 60 nm
LCD-Indicator with Illumination: 2 x 8-digit Accuracy: see table below
Electr. Connection: Cable Entry: 2 x PG (M16 x 1.5)
Cable Connection: 2 x M12 plug-in(SS 316), (1) 4 pin, (1) 5 pin
Supply Voltage: 18-36 V DC 160 mA maximum
Input:: Range Switching: E1 and E2 (24 VDC) DC decoupled
Output:: Analog: 4-20 mA
Short Circuit Proof: DC decoupled
Switching: 24 V DC 80 mA max.respectively to GND of power supply
Measurement Ranges:: NTU: 0-5; 10; 20; 50; 100; 200; 500; 1000; 2000;4000; 5000
EBC: 0-1; 2; 5; 10; 20; 50;100; 200; 500; 1000;1250
Damping Time: 0; 1; 2; 4; 8; 16; 32; 64; 128 seconds (adjustable)