Anderson AE Air Eliminator

The “AE” air eliminator solves many of the problems associated with air or gas presence in pumped liquids. Line vibration due to 2-phase fl ow, poor fl ow meter measurement accuracy, and product quality issues are a few of the more common negative effects of gas presence in a liquid. As the name suggests, the “AE” series Air Eliminator is designed to remove the air or gas present in these product streams. Designed to be located after the pumping device in a positive pressure line, product enters at a tangent to the wall ofthe vessel, the resultant force stratifi es the incoming product putting the heavier liquidtowards the wall with the lighter aerated product separating towards the center. Thisseparation is then completed by allowing only the liquid at the outer wall to exit the vessel at the bottom located outlet. When a sufficient quantity of air is collected at the center it is automatically vented at the top of the vessel. The fully mechanical design means that no additional control boxes or electrical wiring is needed to operate, simplifying installation and reducing long term ownership cost. Applications for the “AE” can vary from intake receiving systems where the “AE” is used to remove air for proper measurement, to the supply of a filling process for improvement of portion control.

$8,190.00 — $8,590.00

$7,118.48 — $7,466.43

You save $1,071.52 — $1,123.57 (13%)!

• Eliminates air from product for accurate meter operation
• Positive pressure operation
• Maintains consistent system flood volume
• 3-A compliant; Third party verified in accordance with standard 29-02

Applications

• Milk
• Cream
• Water
• Juices

Performance:: Maximum Flowrate: 300 gpm (1100 l/min)
Operational Pressure Range : 0-65 psig (1-4.5bar)
Operating / Environmental:: Maximum Temperature: 266°F (130°C)
Connection: Sanitary clamp
Sizes Available: 2”, 3”
Materials / Construction:: Housing and Internal
Components: 304SS &316LSS (optional all 316 SS available consult factory)
Gaskets: Buna